Affects current connectors (loose/delivered with products and those soldered on internal PCB) as used in a number of Series X and Computers products from Hatteland Display, commonly referred to as; Terminal Block 5.81 and Terminal Block 3.81 connectors in our Datasheets and User Manuals, see example illustrations below. Applies to both male (loose) and female (on PCB) connectors.
| |
|
| 4-pin Terminal Block 3.81 (Weidmüller 1792970000) | 5-pin Terminal Block 3.81 (Phoenix 1827732) |
| |
|
| 2-pin Terminal Block 5.08 (Phoenix 1961986) | 2-pin Terminal Block 5.08 (Weidmüller 1944330000) |
| |
|
| 5-pin Terminal Block 3.81 (Weidmüller 1792980000) | Example PCB Mounted Connectors (female) |
CHANGE(S) APPLIES FOR THE FOLLOWING CONNECTORS:
4-pin Terminal Block 3.81 (Weidmüller 1792970000)
5-pin Terminal Block 3.81 (Phoenix 1827732)
2-pin Terminal Block 5.08 (Phoenix 1961986)
2-pin Terminal Block 5.08 (Weidmüller 1944330000)
5-pin Terminal Block 3.81 (Weidmüller 1792980000)
Example PCB Mounted Connectors(female)
EFFECTIVE FROM:
Implemented in production as of this dated ECN.
Existing Product Type Numbers remain unchanged.
CHANGE(S):
- Qualification of second source industrial connector, equivalent to connectors from Weidmüller and Phoenix.
ADDITIONAL INFORMATION:
New connectors have been tested and verified according to Hatteland Displays procedures (extended performance test, functionality test and hardware compatibility test) and EN60945 & IACS E10 compliance test.
Connectors from all suppliers will be used in parallel, but not combined in a product.
For further enquiries regarding this Engineering Change Notification, please contact HelpDesk at Hatteland Display.
| Implemented by: ____________________________________________________ Frode Grindheim Vice President Product Management Hatteland Display AS |