image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1

 

Product Notifications

in Engineering Change Notifications

Hatteland Display hereby informs about changes for the following accessory:
Description: 19 inch Series X G1 to fit 19 inch Series 2 Console Cutout.


image
 image
HD 19TAP SX1-C2 (HW00) HD 19TAP SX1-C2 (HW01)



CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND DISPLAY® PRODUCT(S):
 HD 19TAP SX1-C2 (HW00)
HD 19TAP SX1-C2 (HW01)
EFFECTIVE FROM:
 As per this dated document. After HW00 version is out of stock, HW01 will take over as 100% compatible replacement.
CHANGE(S):
 - Revised depth for rear support plate and added ventilation holes.


 ADDITIONAL INFORMATION:
 Initial version of accessory was only compatible with Series X G1 Maritime Multi Displays (MMD) and Industrial Standard Displays (STD). Revised (HW01) version is now also compatible with Series X G1 Maritime Multi Computers (MMC) as well.

New HW01 model is still compatible with MMD and STD products. Typenumbers remains unchanged. Review attached Sales Drawing below for exact design changes.


For further enquiries regarding this Engineering Change Notification, please contact HelpDesk at Hatteland Display.




Implemented by:
____________________________________________________



Frode Grindheim
Vice President Product Management
Hatteland Display AS


Links to relevant file(s):