New firmware (FW) versions are under implementation step by step in our production, fully implemented by January 13th 2013.
| |
CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND DISPLAY® PRODUCT(S):
HD 12T21 MMD-xxx-xxxx
HD 15T21 MMD-xxx-xxxx
HD 17T21 MMD-xxx-xxxx
HD 19T21 MMD-xxx-xxxx
HD 24T21 MMD-xxx-xxxx
HD 26T21 MMD-xxx-xxxx
CHANGE(S):
Ethernet port for MMD versions (FW:E121003V1):
- Upgrade, to make all SCOM commands working through Ethernet.
Glass Display Controlâ„¢ (GDC) / OSD, added features (FW:121023R0V01):
- Brightness value after power off is restored back to last value set.
- Issue with GDC on/off status getting out of sync solved.
Video chipset update (FW:1212xxV1 and 1301xxV1):
- Fix issue with setting IP address.
- Support external potentiometer and +/- BRT (brightness) buttons.
- Hotkey and source label will have same name as set source name in OSD (OnScreen Display menu).
New OSD commands added:
OSD Lock Mode (full) - Set GDC button protection mode (password request on all buttons).
OSD Key Outdoor - Set GDC mode on/off (5 sec delay for all buttons).
New SCOM commands added:
FHA - Potentiometer enable/disable.
GMB - Set GDC Minimum Brightness.
ADDITIONAL INFORMATION:
Review attached updates of User Manual and SCOM Technical Manual.
For further enquiries regarding this Engineering Change Notification, please contact HelpDesk at Hatteland Display.
| Implemented by: ____________________________________________________ Frode Grindheim Vice President Product Management Hatteland Display AS |