New firmware (FW) version is under implementation in our production. All Series X STD display products manufactured on July 01, 2015 or later will be delivered with this new FW implemented.
| |
|
| HD 12T21 STD-xxx-xxxx | HD 15T21 STD-xxx-xxxx |
| |
|
| HD 17T21 STD-xxx-xxxx | HD 19T21 STD-xxx-xxxx |
| |
|
| HD 24T21 STD-xxx-xxxx | HD 26T21 STD-xxx-xxxx |
CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND DISPLAY® PRODUCT(S):
HD 12T21 STD-xxx-xxxx
HD 15T21 STD-xxx-xxxx
HD 17T21 STD-xxx-xxxx
HD 19T21 STD-xxx-xxxx
HD 24T21 STD-xxx-xxxx
HD 26T21 STD-xxx-xxxx
Note: Customized models (id: HD xxT21 xxS-xxx-xxxx) are ALSO affected by this Engineering Change Notification. Maritime Multi Displays (MMD) models are not affected.
EFFECTIVE FROM:
1 July 2015. Firmware will be fully implemented on all delivered units on and after this date.
CHANGE(S):
- Improved performance, storage of user settings in the product.
- Updated LED backlight drive code for 26 inch LED for better stability.
- FW with improved functionality must have Firmware 150520 or later.
- 26 inch LED also should have Cypress 150505 in addition.
ADDITIONAL INFORMATION:
This is a running change in our products and production. No need for updates on already delivered units.
For further enquiries regarding this Engineering Change Notification, please contact HelpDesk at Hatteland Display.
| Implemented by: ____________________________________________________ Frode Grindheim Vice President Product Management Hatteland Display AS |