image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1
 


FAQ

in  FAQ - Technical

Which measures would be necessary for the periodical maintenance?

Posted on Jan 22, 2020

Hatteland Technology's recommendation for Power-up a stored monitor is as follows:

Power up sequence:
- Apply current.
- Check that the signal source selected is Analog RGB1 in the OSD menu.
- Check that the brightness level on the LEDs and back light can be adjusted using the "+" and "-" buttons, or using the potentiometer if this is installed.
- Press both hot keys and verify that they are "no function".
- Monitor shall run for 2hrs, minimum. Apply any kind of picture.
- Turn off the display by pressing the Menu button for about six seconds.
- Check that the LEDs are turning one by one for a full circular rotation before the video source menu is displayed.
- Once the menu is displayed, all 8 LEDs shall glow red.

Hatteland Technology recommends to track such power up by document/checklist.