Jakob Hatteland Display AS will release a new 19 inch, Fujitsu based, Maritime Multi Display in May 2002. This display will be a suitable replacement for the obsoleted 21 inch CRT.
- Our new JH 19T01 MMD - 19.0 inch Maritime Multi Display
- Suitable replacement for the obsoleted 21 inch CRT monitor
- Due for release in May 2002
Product Name:
JH 19T01 MMD-A1 (AC110-220V)
JH 19T01 MMD-A2 (24VDC)
New important characteristics:
Contrast ratio: 500:1 (typical)
Viewable angle: 160 deg all around, +/- 85 deg (up/down/left/right)
Accessory such as front bezel and cabinet are included in this product. To use this new display as a stand-alone display, instead of rack mounted, you will only need the suspension bracket type
JH MMDBR STD-A1.
This new display is tested according to the maritime standard EN60945; 1996/11 (IEC945) and will be type approved by the following classification societies:
• DNV- Det Norske Veritas
• LRS- Lloyd’s Register of Shipping
• GL- Germanischer Lloyds
• ClassNK- Nippon Kaiji Kyokai
• ABS- American Bureau of Shipping
Data sheets and drawings for this new product is available at our internet site: http://www.hatteland.com
We kindly ask you to enter these new type numbers for this display in your information system when the delivery starts.