Product Notifications

2025

10 February 2025

CAN - NXP Firmware Change - [ 02_2025_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

8 January 2025

HT B30 BIOS change - [ 39_2024_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

2024

9 December 2024

AVA VS Firmware change - [ 34_2024_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

14 October 2024

GEV2/AVA NXP Firmware change - [ 31_2024_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

2023

24 November 2023

GEV2/AVA NXP Firmware change - [ 42_2023_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s): HD T22/T23 MMD/MVD/xxD and JH/HM T1x MMD/xxD G2

24 November 2023

GEV2 VS Firmware change - [ 43_2023_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s): HD T22/T23 MMD/xxD and JH T1x MMD/xxD G2.

15 November 2023

HD xxT22 MMC and HD 24T23 MMC Q170 NXP Firmware change - [ 39_2023_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s): HD xxT22 MMC Q170 Standard, with GDCX rev6

9 October 2023

CAN FW update - [ 34_2023_ECN ]

Hatteland Technology AS hereby informs about changes for the SLCAN module available as standard, stand-alone or as a factory option for the following product ranges: Panel Computers: HD xxT30 MMC-xxx-xxxxxx, HD xxT36 MMC-xxx-xxxxxx, HD xxT22 MxC-xxx-xxxxxx, HD xxT26 MxC-xxx-xxxxxx, HD xxT21 MxC-xxx-xxxx Computers: HT B30xx STC-xxx-xxxxxx, HT B40xx STC-xxx-xxxxxx, HTC03-xx-AC xxxxxxx, HT C02xx ST...

23 June 2023

CAN FW update - [ 21_2023_ECN ]

Hatteland Technology AS hereby informs about changes for the SLCAN module available as standard, stand-alone or as a factory option for the following product ranges: Panel Computers: HD xxT30 MMC-xxx-xxxxxx, HD xxT36 MMC-xxx-xxxxxx, HD xxT22 MxC-xxx-xxxxxx, HD xxT26 MxC-xxx-xxxxxx, HD xxT21 MxC-xxx-xxxx Computers: HT B30xx STC-xxx-xxxxxx, HT B40xx STC-xxx-xxxxxx, HTC03-xx-AC xxxxxxx, HT C02xx ST...

5 April 2023

CAN module update due to supply chain optimization - [ 15_2023_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

13 March 2023

NXP FW update for Series X T22/T23 MMD/MVD Monitors with updated GDC (keypad) - [ 12_2023_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

17 February 2023

Updated GDC (keypad) HW and supporting FW for Series X T22/T23 MMD/MVD Monitors and Series X T22/T23 MMC panel computers - [ 04_2023_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

15 February 2023

Video Scaler Firmware update affecting Series X G2 MMD, HM 24 CMD and Series 1 G2 MMD - [ 10_2023_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

2 February 2023

Series X Generation 2 update due to component availability for motherboard - [ 08_2023_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

18 January 2023

Updated GDC (keypad) HW and supporting FW for Series X T21 STD Monitors and Series X T21 MMC panel computers - [ 06_2023_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

2022

28 April 2022

Updated LED driver solution for all 24 inch LCD variant for HD 24T21 / HD 24T22 Series X models - [ 08_2022_ECN ]

Hatteland Technology AS hereby informs about changes for the following Monitors (MMD / STD) and Panel Computer (MMC) - Series X Generation 1 and 2 based model(s):

23 March 2022

Series X G2 and Series 1 G2 Monitors, Firmware update - [ 04_2022_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

23 March 2022

Series X G2 - Maritime Multi Computer (MMC), Firmware Update - [ 05_2022_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

23 March 2022

Series E - Maritime Multi Computer (MMC) - Firmware Update - [ 06_2022_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

23 March 2022

Series X HD 08T30 and HD 13T30 - Maritime Multi Computer (MMC) - Firmware Update - [ 07_2022_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

2021

24 August 2021

BIOS update HTC03 and HT20370 - [ 11_2021_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

14 July 2021

Firmware update affecting Series X MVD Displays, 32, 43 and 55 inch - [ 09_2021_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

10 May 2021

Add support of direct source swap on hotkey - [ 06_2021_ECN ]

Hatteland Technology AS hereby informs about changes for the following Series X Generation (G2) Maritime Multi Display (MMD) - 15, 17, 19, 24, 26 and 27 inch sizes:

2020

16 December 2020

Series X G2 - Maritime Multi Display (MMD), Firmware Update - [ 24_2020_ECN ]

New firmware (FW) version is under implementation in our production. All Series X G2 MMD display products manufactured on January 1st 2021 or later will be delivered with this new FW implemented. Available for download for units in field, from the date of this ECN. Hatteland Technology AS hereby informs about changes for the following model(s):

5 November 2020

Series X G2 - Maritime Multi Computer (MMC), Firmware Update - [ 23_2020_ECN ]

New firmware (FW) version is under implementation in our production. Sizes 19" - 27" X G2 MMC Panel Computer products manufactured on December 1st 2020 or later will be delivered with this new FW implemented. Available for download for units in field, from the date of this ECN.

21 February 2020

Improved boot sequence for 8, 13 inch (Series X) and 15.6, 21.5, 23.8 and 27.0 inch (Series E) Panel Computers (MMC) - [ 06_2020_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

3 January 2020

Series X G2 - Maritime Multi Display (MMD), Firmware Update - [ 32_2019_ECN ]

New firmware (FW) version is under implementation in our production. All Series X G2 MMD display products manufactured on January 6th 2020 or later will be delivered with this new FW implemented. Available for download for units in field, from the date of this ECN.

2019

11 September 2019

Firmware update affecting Series X G2 MMD Displays, 15 to 27 inch - [ 13_2019_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

11 September 2019

Firmware update affecting Series X MVD Displays, 32, 43 and 55 inch - [ 22_2019_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

29 May 2019

Hardware change / upgrade for 32inch and 55inch products - [ 08_2019_ECN ]

We will upgrade all our 32 and 55inch models with digital inputs only, having the same input specifications as our 43inch display. Touch models have a new touch controller with same performance and driver support as the current version. Additionally, we added a feature for future stylus and tactor support. Hatteland Technology AS hereby informs about changes for the following model(s):

15 April 2019

Firmware update affecting Series X STD/MMC G1 with touch screen, 17 inch - [ 10_2019_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

29 March 2019

Firmware update affecting Series X MMD/STD Displays, 12 to 26 inch - [ 12_2019_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

29 March 2019

Firmware update affecting Series X G2 MMD Displays, 15 to 27 inch - [ 14_2019_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

8 February 2019

BIOS update for HT B30 - [ 02_2019_ECN ]

Abnormal failure rate have been discovered at HT B30 systems, the symptom is random freeze, random reboot or random blue screen. For those customers that may have experienced this issue, the typical failure rate is (MTBF) 100h-1000h for systems equipped with m.2 SSD and >1500h for system equipped with 2.5" SSD. The root cause is related to the signal quality of SVID signals, affecting the transit...

7 February 2019

Added TPM 2.0 support for Maritime Multi Computers (MMC) Series X G2 - [ 01_2019_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

2018

13 November 2018

Firmware update affecting Series X MMD Displays - [ 16_2018_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

6 November 2018

Firmware update affecting 32 and 55 inch Displays - [ 15_2018_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

25 June 2018

Standard ECDIS calibration of Hatteland Display -xA4 models - [ 09_2018_ECN ]

Hatteland Display hereby informs about changes for the following model(s): Listed xA4 models below contains ECDIS color calibration correction files for the following 4 palettes: - DAY - DUSK - NIGHT - DAY BLACKBACK Day Blackback was added as a standard for the listed models as a customer request, it is not a formal requirement in ECDIS. To optimize our production flow, we are going back to the...

24 April 2018

Firmware update for 32 and 55 inch products - [ 06_2018_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

26 February 2018

New internal Memory Chip (on video scaler) for Industrial Standard Displays (STD) - Series X - [ 02_2018_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

9 January 2018

UPDATE: Series X - Maritime Multi Display (MMD), Firmware Update - [ 31_2017_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

2017

30 June 2017

GDCX - Change of ECDIS and +/- symbol color - [ 21_2017_ECN ]

Hatteland Display hereby informs about changes for Glass Display Control (GDCX) - User Controls: Series X Generation 2 (G2) - Maritime Multi Display (MMD): 24 and 26 inch displays. Multi Vision Display (MVD): 32 inch display, 55 inch Chart & Planning Table and 55 inch Wall Mount display.

10 February 2017

DDC/CI support (new firmware) added for Series X G1 Displays - [ 02_2017_ECN ]

DDC/CI (Display Data Channel/Command Interface) specifies a means for a computer to send commands to the unit's Display Video Controller to programmatically adjust parameters of the display instead of pressing physical buttons or navigate through an OSD menu. Specific commands to control units are defined in a separate official Monitor Control Command Set (MCCS) industry standard. The signal inpu...

2016

29 September 2016

Series 1 - Maritime Multi Display (MMD) - [ 15_2016_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

27 April 2016

HT B22 models - Improved MODBUS compatibility - [ 11_2016_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

11 February 2016

Series X - Maritime Panel Computers (MMC) and HT B22 Computer, BIOS update - [ 07_2016_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

2015

15 July 2015

Series X - Industrial Display (STD), Firmware Update - [ 17_2015_ECN ]

New firmware (FW) version is under implementation in our production. All Series X STD display products manufactured on July 01, 2015 or later will be delivered with this new FW implemented.

28 April 2015

Touch Screen updates (Firmware, Glass, Controller) for 24/26 inch - Series X models - [ 21_2015_ECN ]

Hatteland Display hereby informs about changes for the Maritime Multi Displays (MMD), Maritime Multi Computers (MMC) and Industrial Standard Displays (STD) with Projected Capacitive Touch Screen (Multitouch) factory option:

24 April 2015

Firmware update, Series X MMD - [ 13_2015_ECN ]

Hatteland Display hereby informs about changes related to "08_2015_ECN" (16 Mar 2015) "Series X - Maritime Multi Display (MMD), Firmware Update"

16 March 2015

Series X - Maritime Panel Computers (MMC) and HT B22 Computer, BIOS and VCOM driver update - [ 07_2015_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

16 February 2015

Series X - Maritime Multi Computers (MMC), GDC Firmware Update - [ 06_2015_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

16 February 2015

Series X - Maritime Multi Display (MMD), Firmware Update - [ 08_2015_ECN ]

New firmware (FW) version is under implementation in our production. All Series X MMD display products manufactured on March 16 or later will be delivered with this new FW implemented.

2014

21 January 2014

Firmware update, 15 inch Display - Series 1 - [ 36_2013_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

2013

5 December 2013

Update of CAN gateway firmware (FW) and drivers / library for the Hatteland Display CAN module - [ 21_2013_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

20 September 2013

Update of Touch Screen firmware for 13 inch Displays and Panel Computers - [ 28_2013_ECN ]

Hatteland Display hereby informs about changes for the following Series X model(s):

9 September 2013

Firmware ECOM update for Maritime Multi Display Series 1 - [ 20_2013_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

18 June 2013

Series X - Firmware updates - [ 05_2013_ECN ]

New firmware (FW) version for the Maritime Multi Computer (MMC) units is under implementation step by step in our production during May/June 2013.

18 June 2013

Series X - Touch Screen Firmware Update - [ 10_2013_ECN ]

This ECN applies for all Maritime Multi Display (MMD), Standard Industrial Display (STD) and Maritime Multi Computer (MMC) products, sizes listed below.

3 June 2013

Improved ON/OFF handling for 8 and 13 inch panel computers - [ 15_2013_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

11 January 2013

Series X - Firmware updates - [ 01_2013_ECN ]

New firmware (FW) versions are under implementation step by step in our production, fully implemented by January 13th 2013.

2012

20 December 2012

Access of User Controls and Input/Ouput via Hatteland Display API - [ 33_2012_ECN ]

Hatteland Display have identified a potential issue in the firmware handling electrical hardware interfaces (IO), affecting Solid State relay, Digital Input, Safety Signal Relay, Brightness Control, Light Sensor, Programmable Alarm LED, Buzzer and Glass Display Control™ (GDC) touch buttons. This relates to both display and panel computer models. The issue relates to some possible malfuncti...

2010

17 December 2010

Firmware ECOM update for Maritime Multi Display Series 1 - [ 47_2010_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

24 August 2010

Unexpected shut down - [ 27_2010_SM ]

We have identified rare cases of the Series 1 range of display units failing very short time after power on (less than 5h). If the unit is operating as normal after 5 hours, then there is no indication that the unit will fail at a later stage of its lifetime (normal failure rates should be expected).

21 May 2010

Firmware update. HM 20T07 CMD-A1 - [ 16_2010_ECN ]

Hatteland Technology AS hereby informs about changes for the following model(s):

30 April 2010

Firmware update for Maritime Multi Display Series 1 - [ 15_2010_ECN ]

Hatteland Display hereby informs about changes for the following model(s):

12 January 2010

Update of BIOS, HT C01 - [ 03_2010_ECN ]

BIOS source code and default configuration have been updated according to listed issues below. New BIOS version: C01AXXA.T02. Hatteland Display hereby informs about changes for the following model(s):

2009

24 August 2009

Keypad locked in reprogramming sequence - [ 26_2010_SM ]

The keypad for Series 1 range of display units has a built-in hotkey (holding the "+" button active for at least 5 seconds, while powering the unit) to let the keypad reprogram itself (the keypad features a micro controller which uses its own firmware). But if there is no new firmware prepared to be loaded into the keypad, it will be locked in the reprogramming sequence and clear its own memory. ...

13 August 2009

Motherboard update for Stand-alone Computers - [ 23_2009_ECN ]

Hatteland Display hereby informs about changes for the following models:

12 June 2009

Firmware update for Maritime Multi Display Series 1 - [ 17_2009_ECN ]

Hatteland Display hereby informs about the following firmware update.

2008

4 November 2008

Firmware update OSD MENU for Maritime Multi Display Series 1 - [ 37_2008_ECN ]

Hatteland Display hereby informs about the following firmware update.

2006

19 December 2006

Small technical changes for our Maritime Stand-alone Computers and Panel Computers - Series 1 - [ 07_2006_ECN ]

We would like to inform you about technical changes for our Maritime Stand-alone Computers and Maritime Multi Computers (MMC) Series 1.

11 December 2006

Minor change of components regarding the fan control and health status monitoring - [ 06_2006_ECN ]

We would like to inform you about technical changes for our Maritime Stand-alone Computers and Maritime Multi Computers (MMC) Series 1.