Product Notifications

Engineering Change Notification

Public | Finalized Published: 2 March 2007 - Reference: 01_2007_ECN

The Chipsets on the Video Controller (for MMD Series 1) used to date are approaching their End of Life

Dear Customers,

We would like to inform you about some technical changes to our products, driven by the necessity to substitute the current Video Chipset. The Chipsets on the Video Controller used to date are approaching their End of Life and will no longer be available in the future.

We are therefore proceeding to update the interface electronics with the latest and state-of-the-art Chipset solutions. We will be initiating the re-design of the following products on a general level to accommodate the above, and will be doing so with two further objectives:

a) Improving the Quality level further.
b) Making the product more cost effective.
JH 15T05 xxx
JH 17T02 xxx
JH 19T02 xxx
JH 20T03 xxx
JH 20T06 xxx
JH 23T02 xxx

Notice: Including all variations and Custom OEM products.

JH 15T05 xxx

Effective from:

Final Last time purchase for existing displays : 25th of May 2007.
Production start of new designed products : 1st of August 2007.

Additional information:

HIGHLIGHTS:
- Increased reliability through fewer modules and cable connections
- Additional signal inputs
- Enhanced picture quality
- New dual power solution
- Switched AC power out as standard
- IP22 Desk mount, IP66 Console mount
- Keep form-fit-function

DETAILS:
New EVX (Embedded Video Controller X-tended):
- 1 x DVI-I and 1 x RGB (= dual RGB input)

New Power Supply, dual input, AC and DC:
- Auto detects AC or DC (priority on AC when both connected)

Voltage ranges according to IEC60945:
- AC 115 V - 230 V (standard IEC inlet connector)
- DC 24V, nominal (screw terminal)

Mechanical Changes - Front Side:
- New, "all in one" user control with brightness control, OSD access & Buzzer
- Removal of lower left hatch and user control
- Cosmetic changes

Mechanical Changes - Rear Side:
- Added connectors, see signal inputs
- Cosmetic changes

Input / Output Connectors:
- IEC inlet
- IEC outlet (new)
- DC screw terminal
- 2 x COM ports (new)
- 1 x RGB in
- 1 x RGB out (new)
- 1 x DVI-I in
- 1 x USB (touch screen) (new)

Optical Technology for enhanced picture quality.
- Bonding can be applied as standard.

ART NUMBER CHANGES:
In general the 2-digit version number 0x will be changed to 1x.

Example:
Old > New
JH 19T02 MMD > JH 19T12 MMD
JH 23T02 MMD > JH 23T12 MMD

Customer Specific solutions and part numbers are / will be specified individually.

This re-design will consequently lead to new part numbers, new IEC60945 and IACS E10 testing including Type Approval certificates and new ECDIS testing.

Your sales contact is available and will be happy to answer any questions that you may have.

Contact:

For further enquiries regarding this Engineering Change Notification, please contact Support at Hatteland Technology AS.

Attachments:

Printable A4 version (378.8kb)
ecn_mmdseries1_2007_01.pdf

Implemented by:

________________________________

Frode Grindheim
VP Products
Hatteland Technology AS

Read and Understood by:

________________________________

(Your name)
(Your company)

Last revised: 10 December 2024