Hatteland Display hereby informs about changes for the following model(s):

CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND DISPLAY® PRODUCT(S):
JH 15T1x MMD-xxx xxxx
JH 19T1x MMD-xxx xxxx
JH 20T1x MMD-xxx xxxx
JH 22T1x MMD-xxx xxxx
JH 23T1x MMD-xxx xxxx
JH 26T1x MMD-xxx xxxx
Note: Customized models are ALSO affected by this Engineering Change Notification.


EFFECTIVE FROM:
Hatteland Display standard models: 9th of September 2013.
Customized models: 9th of October 2013.


ADDITIONAL INFORMATION:

Standard and custom JH 15Txx, JH 19Txx, JH 20T16, JH 20T17, and JH 26T11:
--------------------------------------------------------------------------
SW100066-1H08 -> SW100066-1K01:
- Updated for RS422 address issue, i2c lock, and BRT overflow.

SW100066-1K01 -> SW100066-1K02:
- RS422/485 communication, new firmware.

SW100066-1K02 -> SW100066-1K03:
- Changed BRI to EEPROM to remember after power off.



Standard and custom JH 23T14 LED:
-----------------------------------
SW100066-1J05 -> SW100066-1J08:
- i2c lock, and BRT overflow.

SW100066-1J08 -> SW100066-4L01:
- Updated for RS422 address issue.

SW100066-4L01 -> SW100066-4L02:
- RS422/485 communication, new firmware.

SW100066-4L02 -> SW100066-4L03:
- Changed BRI to EEPROM to remember after power off.



Standard and custom JH 15T17 and JH 19T14 LED HW06:
------------------------------------------------------
SW100066-4M01 –> SW100066-4M02:
- RS422/485 communication, new firmware.

SW100066-4M02 –> SW100066-4M03:
- Changed BRI to EEPROM to remember after power off.



For further enquiries regarding this Engineering Change Notification, please contact HelpDesk at Hatteland Display.