image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1

 

Product Notifications

in Engineering Change Notifications

Hatteland Display hereby informs about changes for the following model(s):


image
image
HD 15T22 MMD-xxx-xxxx HD 17T22 MMD-xxx-xxxx



image
image
HD 19T22 MMD-xxx-xxxx HD 24T22 MMD-xxx-xxxx



image
image
HD 26T22 MMD-xxx-xxxx HD 27T22 MMD-xxx-xxxx



CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND DISPLAY® PRODUCT(S):
HD 15T22 MMD-xxx-xxxx
HD 17T22 MMD-xxx-xxxx
HD 19T22 MMD-xxx-xxxx
HD 24T22 MMD-xxx-xxxx
HD 26T22 MMD-xxx-xxxx
HD 27T22 MMD-xxx-xxxx
Note: Customized models are ALSO affected by this Engineering Change Notification.


EFFECTIVE FROM:
1 January 2019.
Note: HD 15T22 MMD-xxx-xHxx (HighBright models) from 1st November 2018.

ADDITIONAL INFORMATION:
New Firmware Version: FW200001-0BV6.

Change Log:
1. Added signal support, new analog timing 724x352i.
2. Improved hotkey menu, due to out of range issue for 15inch display.
3. Fine-tuned LVDS driver for 24inch, 26inch and 27inch displays.
4. Firmware ID visible in Basic Mode. (Before: only visible in Service Mode)
5. Stability improvements.

Update of firmware is recommended if your system require the added/revised functionality.



For further enquiries regarding this Engineering Change Notification, please contact HelpDesk at Hatteland Display.




Implemented by:
____________________________________________________



Frode Grindheim
Vice President Product Management
Hatteland Display AS