image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1


Product Notifications

in Engineering Change Notifications

Hatteland Display hereby informs about changes for the following model(s):


image
HD xxT21 xxD-xxx-xxxx



CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND DISPLAY® PRODUCT(S):
HD xxT21 xxD-xxx-xxxx
Note: Customized models are ALSO affected by this Engineering Change Notification.


EFFECTIVE FROM:
1 June 2019. For existing units, available May 2019.

CHANGE(S):
Now supports extended address mode (removed limitation of 16 units).


ADDITIONAL INFORMATION:
This update is not mandatory, this is only required for installations when/where more than 16 units are controlled/accessed over the same SCOM bus.

MMD units can be updated in field, please contact HelpDesk for tools and guidelines.
STD units require that the update is performed by Hatteland Display or by approved service partners.



For further enquiries regarding this Engineering Change Notification, please contact HelpDesk at Hatteland Display.




Implemented by:
____________________________________________________



Frode Grindheim
Vice President Product Management
Hatteland Display AS