Product Notification

 

in Engineering Change Notifications

To ensure continuous compliance to IACS E10 and product safety, we have decided to implement a product design update for all products in Series 1. The new IACS E10 rev 8 requirements involves compliance to higher frequencies, hence this update. The change is not required by all models or variants, but to keep similarity between models and common parts - it is decided to update across the product range as described below.

The change is visible as a cosmetic update in the form of smaller ventilation holes in the chassis. Similar updates will be made to other product ranges as well.

Hatteland Technology AS hereby informs about changes for the following model(s):

jh15t17mmd-xrx__01

 

jh19t14mmd-xrx-s__01

 

JH 15T17 MMD-xRx-xxxx JH 19T14 MMD-xRx-Sxxx



jh19t14mmd-xrx__01

 

jh20t17mmd-xrx__01

 

JH 19T14 MMD-xRx-xxxx JH 20T17 MMD-xRx-xxxx



jh23t14mmd-xrx__01

 

 
JH 23T14 MMD-xRx-xxxx  



CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND TECHNOLOGY PRODUCT(S):
JH 15T17 MMD-xRx-xxxx
JH 19T14 MMD-xRx-Sxxx
JH 19T14 MMD-xRx-xxxx
JH 20T17 MMD-xRx-xxxx
JH 23T14 MMD-xRx-xxxx
Note: Customized models are ALSO affected by this Engineering Change Notification.

EFFECTIVE FROM:
Gradual transfer, starting during Q4 2021.
If samples are needed, or a strictly controlled backlog management for current / new model, please contact your normal sales contact.

CHANGE(S):
Chassis ventilation holes.
Mx Black Nylon blank screws added to acc kit, in case bracket are not used.

ADDITIONAL INFORMATION:
We will not change the part numbering for this change.
Review updated Sales Drawing for all affected models below.


For further enquiries regarding this Engineering Change Notification, please contact Support at Hatteland Technology AS.




Implemented by:
____________________________________________________

Frode Grindheim
VP Products
Hatteland Technology AS
Read and Understood by:
_______________________________________

(Your name and Company)


Links to relevant file(s):