Hatteland Technology AS hereby informs about changes for the following model(s):
HD 15T22 MMD-xxx-xxxx | HD 17T22 MMD-xxx-xxxx |
HD 19T22 MMD-xxx-xxxx | HD 24T22 MMD-xxx-xxxx |
HD 26T22 MMD-xxx-xxxx | HD 27T22 MMD-xxx-xxxx |
JH 15T17 MMD-xRx-xxxx | JH 19T14 MMD-xRx-Sxxx |
JH 19T14 MMD-xRx-xxxx | JH 20T17 MMD-xRx-xxxx |
JH 23T14 MMD-xRx-xxxx |
CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND TECHNOLOGY PRODUCT(S):
HD 15T22 MMD-xxx-xxxx
HD 17T22 MMD-xxx-xxxx
HD 19T22 MMD-xxx-xxxx
HD 24T22 MMD-xxx-xxxx
HD 26T22 MMD-xxx-xxxx
HD 27T22 MMD-xxx-xxxx
JH 15T17 MMD-xRx-xxxx
JH 19T14 MMD-xRx-Sxxx
JH 19T14 MMD-xRx-xxxx
JH 20T17 MMD-xRx-xxxx
JH 23T14 MMD-xRx-xxxx
Note: Customized models are ALSO affected by this Engineering Change Notification.
EFFECTIVE FROM:
1 April 2022. Gradual transfer, starting during April 2022.
If samples are needed, or a strictly controlled backlog management for current / new model, please contact your normal sales contact.
ADDITIONAL INFORMATION:
NXP Firmware: Old: FW100002-0A35 => NEW: FW100002-0A38
- Added support of PMBUS for 125W multi power.
- Added support light sensor LTR303.
- Correction of command SWK and MCC 0xB3, used for S1 communication mode, affects Series 1 Generation 2 (G2) Monitors.
Please review the attached documentation for SCOM, Series 1 Generation 2 (G2) models.
Update 24 October 2022:
Latest active Firmware can now be found/downloaded on our product page under Downloads/Firmware section on our website.
For further enquiries regarding this Engineering Change Notification, please contact Support at Hatteland Technology AS.
Implemented by: ____________________________________________________ Frode Grindheim VP Products Hatteland Technology AS |
Read and Understood by: _______________________________________ (Your name and Company) |