Series X G2 - Maritime Multi Computer (MMC), Firmware Update
New firmware (FW) version is under implementation in our production. Sizes 19" - 27" X G2 MMC Panel Computer products manufactured on December 1st 2020 or later will be delivered with this new FW implemented.
Available for download for units in field, from the date of this ECN.
|
|
HD 19T22 MMC-xxx-xxxxxx | HD 24T22 MMC-xxx-xxxxxx |
|
|
HD 26T22 MMC-xxx-xxxxxx | HD 27T22 MMC-xxx-xxxxxx |
CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND TECHNOLOGY PRODUCT(S):
HD 19T22 MMC-xxx-xxxxxx
HD 24T22 MMC-xxx-xxxxxx
HD 26T22 MMC-xxx-xxxxxx
HD 27T22 MMC-xxx-xxxxxx
EFFECTIVE FROM:
1 December 2020. Firmware will be gradually implemented on all delivered units on and after this date.
Customer unique models can be updated on request.
CHANGE(S):
-Added an improvement upon the OSD Key Outdoor. When switched on, it will suppress UHF signals from impacting the GDC.
-When in OSD Key Outdoor mode the power button has changed behavior: Longer press and hold time to power off the unit.
Soft off: 6 seconds.
Hard off: 30 seconds.
Brilliance «buttons» needs a longer press and hold: 6 seconds.
The UHF suppression will now be deactivated for 6 seconds, and will keep it deactivated for as long as there have not been any "button" presses in the last 6 seconds.
Once there has not been any GDC interactions within the last 6 seconds, the UHF suppression will become activated again.
Update 11 November 2022:
Latest active Firmware can now be found/downloaded on our product page under Downloads/Firmware section on our website.
For further enquiries regarding this Engineering Change Notification, please contact Support at Hatteland Technology AS.
Implemented by: ____________________________________________________ Frode Grindheim VP Products Hatteland Technology AS |
Read and Understood by: _______________________________________ (Your name and Company) |