New firmware (FW) version is under implementation in our production. All Series X STD display products manufactured on July 01, 2015 or later will be delivered with this new FW implemented.
|
|
HD 12T21 STD-xxx-xxxx | HD 15T21 STD-xxx-xxxx |
|
|
HD 17T21 STD-xxx-xxxx | HD 19T21 STD-xxx-xxxx |
|
|
HD 24T21 STD-xxx-xxxx | HD 26T21 STD-xxx-xxxx |
CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND DISPLAY® PRODUCT(S):
HD 12T21 STD-xxx-xxxx
HD 15T21 STD-xxx-xxxx
HD 17T21 STD-xxx-xxxx
HD 19T21 STD-xxx-xxxx
HD 24T21 STD-xxx-xxxx
HD 26T21 STD-xxx-xxxx
Note: Customized models (id: HD xxT21 xxS-xxx-xxxx) are ALSO affected by this Engineering Change Notification. Maritime Multi Displays (MMD) models are not affected.
EFFECTIVE FROM:
1 July 2015. Firmware will be fully implemented on all delivered units on and after this date.
CHANGE(S):
- Improved performance, storage of user settings in the product.
- Updated LED backlight drive code for 26 inch LED for better stability.
- FW with improved functionality must have Firmware 150520 or later.
- 26 inch LED also should have Cypress 150505 in addition.
ADDITIONAL INFORMATION:
This is a running change in our products and production. No need for updates on already delivered units.
For further enquiries regarding this Engineering Change Notification, please contact HelpDesk at Hatteland Display.
Implemented by: ____________________________________________________ Frode Grindheim Vice President Product Management Hatteland Display AS |