image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1image1
 
 


Product Notification

 

in Engineering Change Notifications

To ensure continuous compliance to IACS E10 and product safety, we have decided to implement a product design update for all products in Series X MVD. The new IACS E10 rev 8 requirements involve compliance to higher frequencies, hence this update. The change is not required by all models or variants, but to keep similarity between models and common parts - it is decided to update across the product range as described below.

The change is visible as a cosmetic update in the form of smaller ventilation holes in the chassis.Similar updates will be made to other product ranges as well.

Hatteland Technology AS hereby informs about changes for the following model(s):

hd43t22mvd-max-cxtx hd_55t22_mvd-max-aogx
HD 43T22 MVD-MAx-CxTx HD 55T22 MVD-MAx-AOGx



hd_55t22_mvd-max-cotx hd55t22mvd-aax-logx
HD 55T22 MVD-MAx-COTx HD 55T22 MVD-AAx-LOGx



hd_55t22_mvd-aax-togp hd_55t22_mvd-max-aogx
HD 55T22 MVD-AAx-TOGP HM 55T22 RMD-MAx-xOVx



hd32t22mvd-aogp__01  
HD 32T22 MVD-MAx-AxGx  



CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND TECHNOLOGY PRODUCT(S):
HD 43T22 MVD-MAx-CxTx
HD 55T22 MVD-MAx-AOGx
HD 55T22 MVD-MAx-COTx
HD 55T22 MVD-AAx-LOGx
HD 55T22 MVD-AAx-TOGP
HM 55T22 RMD-MAx-xOVx
HD 32T22 MVD-MAx-AxGx
Note: Customized models are ALSO affected by this Engineering Change Notification.

EFFECTIVE FROM:
Gradual implementation, starting during Q1 2022.
If samples are needed, or a strictly controlled backlog management for current / new model, please contact your Sales Representative.

CHANGE(S):
Chassis ventilation holes changed to small round.
Mx Black Nylon blank screws added to acc kit, in case bracket are not used.

ADDITIONAL INFORMATION:
We will not change the part numbering for this change.
Review updated Sales Drawing for all affected models below.


For further enquiries regarding this Engineering Change Notification, please contact Support at Hatteland Technology AS.


Implemented by:
____________________________________________________

Frode Grindheim
VP Products
Hatteland Technology AS

Read and Understood by:
_______________________________________

(Your name and Company)



Links to relevant file(s):