To ensure continuous compliance to IACS E10 and product safety, we have decided to implement a product design update for all products in Series X MMD & MMC G2. The new IACS E10 rev 8 requirements involve compliance to higher frequencies, hence this update. The change is not required by all models or variants, but to keep similarity between models and common parts - it is decided to update across the product range as described below.
The change is visible as a cosmetic update in the form of smaller ventilation holes in the chassis. Similar updates will be made to other product ranges as well.
Hatteland Technology AS hereby informs about changes for the following model(s):
![]() |
![]() |
HD 15T22 MMD-xxx-Fxxx | HD 17T22 MMD-xxx-Fxxx |
![]() |
![]() |
HD 19T22 MMD-xxx-Fxxx | HD 24T22 MMD-xxx-Fxxx |
![]() |
![]() |
HM 24T22 CMD-MAx-FOGx | HD 24T23 MMD-xxx-Fxxx |
![]() |
![]() |
HD 26T22 MMD-xxx-Fxxx | HD 27T22 MMD-xxx-Fxxx |
![]() |
![]() |
HD 08T30 MMC-2xx-xxxEAx | HD 08T30 MMC-2xx-xxxxAx |
![]() |
![]() |
HD 13T30 MMC-2xx-xxxxxx | HD 19T22 MxC-xxx-xxxxxx |
![]() |
![]() |
HD 24T22 MxC-xxx-xxxxxx | HD 26T22 MxC-xxx-xxxxxx |
![]() |
|
HD 27T22 MxC-xxx-xxxxxx |
CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND TECHNOLOGY PRODUCT(S):
HD 15T22 MMD-xxx-Fxxx
HD 17T22 MMD-xxx-Fxxx
HD 19T22 MMD-xxx-Fxxx
HD 24T22 MMD-xxx-Fxxx
HM 24T22 CMD-MAx-FOGx
HD 24T23 MMD-xxx-Fxxx
HD 26T22 MMD-xxx-Fxxx
HD 27T22 MMD-xxx-Fxxx
HD 08T30 MMC-2xx-xxxEAx
HD 08T30 MMC-2xx-xxxxAx
HD 13T30 MMC-2xx-xxxxxx
HD 19T22 MxC-xxx-xxxxxx
HD 24T22 MxC-xxx-xxxxxx
HD 26T22 MxC-xxx-xxxxxx
HD 27T22 MxC-xxx-xxxxxx
Note: Customized models are ALSO affected by this Engineering Change Notification.
EFFECTIVE FROM:
Gradual implementation, starting during Q4 2021.
If samples are needed, or a strictly controlled backlog management for current / new model, please
contact your normal sales contact.
CHANGE(S):
Mx Black Nylon blank screws added to acc kit, in case bracket are not used.
Chassis ventilation holes changed to small round.
ADDITIONAL INFORMATION:
We will not change the part numbering for this change.
Review updated Sales Drawing for all affected models below.
For further enquiries regarding this Engineering Change Notification, please contact Support at Hatteland Technology AS.
Implemented by: Frode Grindheim |
Read and Understood by: (Your name and Company) |